Confirmation Output with Supervisory Input mode
This example shows how to set a confirmation output when there is a state change on the associated
Supervisory input.
Mode settings notes
Confirmation
Output/Supervisory
Input
Output type: See page 4
Failsafe See page 4.
Mains failure See page 4.
Output normally See page 4.
Associated input: The selected input channel is associated with the
confirmation output channel.
Input delay See page 6.
Input normally See page 6.
Commissioning information S4 Mains powered interface unit
12 4188-968 issue 2_Part 2_09-10_S4 mains interface
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
