8
Introduction
USER LEVEL 3 - All front panel controls are functional. Full system configuration and
programming are possible. User Level 3 is reachable by entering a passcode from either
Level 1 or Level 2. User Level 3 is for the system installer. Level 3 user can configure
passcodes for Level 2 users.
NOTE: The default passcode for LEVEL 3 is 98989898.
USER LEVEL 4 - The user with Level 4 access can perform, all the operations of User Levels
2, and 3. User Level 4 can do the firmware update and manage users of Level 2, Level3 and
wipe the event log. The user with Level 4 access is the master user. Level 4 user can
configure passcode for Level 3 user.
NOTE: The default passcode for LEVEL 4 is 00000000.
To Next Page
Loading...
Need help?
General
