4
About this Guide
1. About this Guide
This guide is for users trained to program the fire panel to work with connected devices.
1.1 Supplemental Documentation
The table below provides a list of documents for various users of STX / SMX fire panels.
1.2 Notice
The material and instructions covered in this guide have been carefully checked for
accuracy and are presumed to be correct. The images in the document are for reference
purpose only and are subject to change. However, the manufacturer assumes no
responsibility for inaccuracies and reserves the right to modify and revise this document
without notice.
These instructions cover the programming and commissioning of the STX / SMX Fire Alarm
Control Panels (FACP).
For any technical assistance email at morleyindiasupport@honeywell.com.
1.3 Documentation Feedback
Your feedback helps us keep our documentation up-to-date and accurate. If you have any
comments or suggestions about our on-line help or manuals, please e-mail us at
FireSystems.TechPubs@honeywell.com.
On-Line Help - Please include the following information:
• Product name and version number (if applicable)
• Topic title
• The content you think should be corrected/improved
• Detailed suggestions for correction/improvement
Documents - Please include the following information:
• Document part number and title
• Page number and paragraph
• The content you think should be corrected/improved
• Detailed suggestions for correction/improvement
Document Name Document Number
Models: STX / SMX Device Compatibility Document NS-MS-0002
Model: STX Installation Guide NS-MN-0019
Model: SMX Installation Guide NS-MN-0025
Models: STX / SMX User’s Guide NS-MN-0018
Models: STX / SMX Programming Guide (This document) NS-MN-0017
SmartConfig™ PC Application User’s Guide NS-MS-0020
SmartConfig™ Mobile Application FAQ Not Applicable
To Next Page
Loading...
Need help?
General
