Honeywell SuperStat - Table of Contents; Setback Recovery

2
Austin Energy
®
Call toll-free at 1-877-549-2774
INTRODUCTION
The Honeywell SuperStat
™
thermostat allows full weekday/weekend programming so you can control the
temperature according to your personal schedule and preferences.
When programmed according to the instructions in this guide, your SuperStat
™
will keep you
comfortable, save energy and money, and reduce peak summer demand for electricity.
Your SuperStat
™
contains a communications module that allows Austin Energy to communicate with
your thermostat. The thermostat receives a signal to cycle off your central air conditioner or heat pump to
limit your electric use during peak demand times.
If you have questions concerning your SuperStat
™
thermostat or the Power Partner program, please
contact us toll-free at 1-877-549-2774.
TABLE OF CONTENTS
Setback Recovery...................................................................................................................................
Setting Your Thermostat ........................................................................................................................
Personal Programming Charts ..............................................................................................................
Programming Your Thermostat.............................................................................................................
Setting the current time/day..........................................................................................................
Entering the program schedules ..................................................................................................
Setting the system and fan controls.............................................................................................
Starting the thermostat program .................................................................................................
Operating Your Thermostat ...................................................................................................................
Thermostat Operation When Cycling Is In Effect................................................................................
Troubleshooting Tips..............................................................................................................................
Toll-Free Customer Assistance .............................................................................................................
Additional Residential Resources............................................................................................................
Commercial Building Thermostat Users.................................................................................................
Commercial Programming Charts ........................................................................................................
SETBACK RECOVERY
Recovery
refers to the process the SuperStat
™
thermostat uses to return the house from the energy savings
setting you select when you are away or asleep, to the temperature you prefer when you are home and
awake.
Your SuperStat
™
thermostat uses a recovery process that turns your heating/cooling equipment on or
off at the time you program the temperature to change. For example, if you program the thermostat’s heating
program to 72 F at 6:00 a.m., the heating equipment will come on at 6:00 a.m. and begin warming the house
to 72 F. If you want the temperature in the house to be 72 F at 6:00 a.m., program the thermostat to come on
at an earlier time, such as 5:30 a.m. The exact amount of time it takes your home to warm or cool to the
temperature you want depends on many factors, such as the size of your heating/cooling equipment, outdoor
temperature, and how well your home is weatherized. Use the charts on page 3 to track your temperatures.
2
3
3
4
4
4
4
5
5
6
7
8
8
8
9