5
Program schedule
You can program 2 time periods each day, with different settings for weekdays
and weekends. We recommend the pre-sets (shown in the table below), since they
can reduce your cooling expenses.
1 Press Menu on your thermostat.
2 PROG is displayed. Press Select.
3 Press or to select day or set of days to
edit. Press Select.
4 Press or to select a schedule period to
edit (ON and OFF). Press Select. (Select OFF if
you want the cooler to be OFF the full day or
set of days you are programing.)
5 Time starts blinking. Press or to adjust
the schedule period start time. Press Select.
6 Fan mode starts blinking. Press or to
select a desired fan mode.
7 Once ON and OFF periods are configured, a
new day or set of days can be selected.
8 Press Home when you are finished to save
and return to Home screen.
To adjust program schedules
ON 7:00 P.M. High Cool
OFF 2:00 A.M. N/A
ON - Set to the time you are at home and
the temperature you want during the
evening, until you are sleeping.
Press Menu on your thermostat.
OFF - Set to the time you are sleeping and
the cooler is no longer needed.
MCR37438
Home
Select
MCR37439
Home
Select
M
on
T
ue
Wed Thu
Fri
Sat
S
un
MCR37440
Home
Select
Back
M
on
PM
MCR37441
Home
Select
Back
Hi
C
ool
M
on
PM
To Next Page
Loading...
Need help?
General
