Honeywell T2 Pro - User Manual

T2 Pro THECC11060MX
Programmable Thermostat
User Guide
Read before installing the unit
Package Includes:
• T2 Pro Thermostat
• Wall Plate Mounting System
• Terminal Block
• Screws
• Installation Instructions and User
Guide
Call Resideo Honeywell Home Customer Care toll-free at
Mexico: 018000835925
Brazil: 08000474323
Colombia: 018009443620
Customer assistance
Thermostat controls
• Pre-wet status
information
On/Off
• Actual Day
• Actual Time
• Mode
Select system mode
Manual / Auto /
Timer / Schedule
/ OFF
• Menu
Press to display
options. Start here
to set a program
schedule
• Indoor temperature
setpoint
Press + or – to change
temperature setting
• Actual indoor
temperature
• Fan
• Select Fan mode
• Pump Only
• High Cool
• Low Cool
• High Vent
• Low Vent
• Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
The screen will wake up by pressing any of the five
buttons. The screen stays lit for 45 seconds after
you complete changes.
M37417
Mode
Menu
Fan
Auto
Hi C ool
P re - Wet
O n
M on
AM

Summary

System Operation Settings

Manual Mode Settings

Configuring thermostat for Manual mode, including fan settings.

Auto Mode Setting

Setting up thermostat in Auto mode with temperature and fan control.

Timer Mode Settings

Schedule Mode Settings

Configuring timed operation schedules, including fan and delay settings.

Set the Time and Day

Setting Degrees Fahrenheit (F) or Celsius (C)

Setting Pre-wet

Program Schedule

To Adjust Program Schedules

Guide to modifying program schedules for ON/OFF periods and fan modes.

Program Schedule Override

Blackout Recovery Protection

Troubleshooting

1-Year Warranty

Honeywell T2 Pro Specifications