Menu FanMode
Fan
Auto
Mode
Heat
Following Schedule
Schedule status
Active Time based schedule or Smart schedule is
indicated by "Following Schedule" text in top left
corner of the thermostat screen.
Schedule period
Shows current schedule period.
• Time-based schedule: Wake, Away, Home or
Sleep.
• Smart schedule: Away, Home or Sleep.
• Occupancy based schedule: Away or Home.
• No schedule: Schedule periods are not
displayed
Back Select
Setting a schedule
To edit a schedule on the thermostat screen,
follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
SCHEDULE, then touch Select.
3 Touch the or arrows to select a period in
a day or set of days, then touch Select on the
period you want to edit.
4 Touch the time area, then touch or to
adjust when the period starts. Touch Select to
confirm.
5 Touch the temperature area, then touch
or to adjust your preferred temperature
for the mode that’s currently active (either
heating or cooling). Touch Select to confirm.
Then touch or to adjust your preferred
temperature for the inactive mode. Touch
Select to confirm.
6 Edit the next period or use the until you
see DONE, then press Select to save changes
and go to the home screen.
NOTES:
• Schedule menu is available only if time based
schedule or smart schedule is configured.
• If not connected to ZWave network, Away
setpoint is programmable for each day or
group of days in MENU/SCHEDULE.
• If connected to ZWave network, Away
setpoint is a common for all days,
programmable in MENU/AWAY SETTING.
Back Select
Sched.
On/Off
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Back Select
Sched.
On/Off
AM
HeatTo
Back Select
AM
HeatTo
Back Select
To Next Page
Loading...
Need help?
General
