Honeywell T6 Pro Z-Wave User Manual

4
Mode
Touch to select
system mode:
• Auto (if enabled)
• Heat
• Cool
• Off
• Em Heat
(Emergency Heat)
Menu
Touch to program
a schedule and see
other customizable
options.
Fan
Touch to select fan
mode:
• Auto
• On
• Circulate
Desired temperature
Shows desired
indoor temperature.
Indoor Temperature/
% Relative Indoor
Humidity
Touch to display
either the current
indoor temperature
or current % relative
indoor humidity.
Adjust temperature
Touch or to
set your desired
temperature.
PM
Menu FanMode
Fan
Auto
Mode
Heat
Thermostat overview
Adjusting the temperature
To adjust the desired temperature up or down,
touch or on the thermostat home screen.
How long the change will be held depends on
whether your thermostat is included or excluded
in ZWave network and what schedule type is
selected.
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule

Honeywell T6 Pro Z-Wave Specifications

General

Model	T6 Pro Z-Wave
Connectivity	Z-Wave
Display	Backlit LCD
Power Source	24 VAC
Compatibility	Z-Wave certified, works with most Z-Wave hubs
Temperature Control	± 1°F
Thermostat Type	Programmable
Programmability	7-day
Stages	Up to 2 Heat/2 Cool
Operating Temperature	32°F to 120°F (0°C to 48.9°C)
Humidity Range	5% to 90% RH, non-condensing