21
Number Alert/Reminder Definition
184 Replace
Humidifier Pad
Replace humidifier pad. Reset the timer by touching
the “dismiss” button on the thermostat screen after it
is replaced.
185 Replace
Dehumidifier
Filter
Replace the dehumidifier filter. Reset the timer by
touching "dismiss" button on thermostat screen after
it is replaced.
186 Clean Ventilator
Core
Clean ventilator core. Reset the timer by touching
the “dismiss” button on thermostat screen after it is
replaced.
187 Clean or
Replace
Ventilator Filter
Clean or replace ventilator filter. Reset the timer by
touching the “dismiss” button on thermostat screen
after it is replaced.
188 Replace UV
Bulb (1)
Replace UV Bulb (1). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.
189 Replace UV
Bulb (2)
Replace UV Bulb (2). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.
252 AC Power Lost If batteries used as backup power it will drain
batteries quickly and ZWave communication needs
to be turned off. The working power mode can only
be changed when thermostat is NOT included in
a ZWave network. Either to exclude and include
thermostat in to ZWave network to change the
power mode to LSS (power-save, sleep mode) or to
resume AC power. You can check the actual power
mode in the thermostat MENU/DEVICE INFO.
405 Battery Low Battery low. Please turn the system mode to off and
replace the batteries.
407 Battery Critical Battery critical. Thermostat cannot control your
system. Please replace the batteries immediately.
546 ZWave Not
Configured
ZWave has not been configured yet to receive
commands from your ZWave network. Please follow
steps on how to include thermostat in to ZWave
network.
547 ZWave Radio
Error
ZWave module is not operating. Thermostat cannot
receive commands from your ZWave network. Please
contact dealer to replace the thermostat.
To Next Page
Loading...
Need help?
General
