EasyManua.ls Logo

Honeywell T6 Pro Z-Wave - Page 42

Honeywell T6 Pro Z-Wave
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Installer setup options (ISU) – advanced menu
Table 5.
# ISU ISU Name ISU Options (defaults in bold) Notes
921 Dehum Filter
Reminder
Off
30, 60 Calendar Days
3 - 12 Calendar Months (in 1 month increments)
1018 Vent Filter Reminder Off, 3, 6, 9, 12 months
1100 UV Devices 0 - 2 Some systems may have two UV devices, one for the ACoil and another for Air Treatment. A replacement
reminder can be setup for each one separately.
1105 UV Bulb 1 Reminder Off, 6, 12, 24 months
1106 UV Bulb 2 Reminder Off, 6, 12, 24 months
1401 Idle Brightness 0= Off, 0 - 5 Adjust brightness of an inactive backlight (idle screen) from default 0 (backlight off) to 5 (maximum bright-
ness). Brightness level higher that 0 will be applied and enabled for user to change in user menu only if ther-
mostat is powered by 24 VAC (C-wire)
1410 Clock Format 12 hour, 24 hour
1415 Daylight Saving On, Off Set to Off in areas that do not follow Daylight Saving Time.
1420 Temperature Offset Off, 3 °F to 3 °F (in 1 °F increments) or
1.5 °C to 1.5 °C (in 0.5 °C increments)
0 °F - No difference in displayed temperature and the actual room temperature. The thermostat can display up
to 3 °F (1.5 C) lower or higher than the actual measured temperature.

Other manuals for Honeywell T6 Pro Z-Wave

Related product manuals