Honeywell T6R-HW

12 13
1. Touch or to
adjust temperature.
Overriding the heating schedule
Hold Until
You can override the programmed Heating schedule in two different ways:
1. Temporary override “Hold Until”
2. Permanent override “Permanent Hold”
• The schedule will
resume when
the Hold Until
time expires.
• Touch
to cancel
the Hold Until
and resume the
regular schedule.
1050 TO 1030
930
195
930
210
1050 TO 1030
1004
195
2. During temperature
adjustment, the Until
time appears.
930
1050 TO 1100
3. Touch the time to
changes it and use
or to adjust.
4.
indicates Hold
Until is active.
Adding a new hot water period
1. Use and to go to HOT WATER and then to ADD PERIOD
SCHED
***MON-FRI**
2. Select the day(s) where
you would like to add
the new period to.
3. Touch the START time
to enter the time where
you want the water to
start being heated. Touch
or to change it.
4. Touch the END time to
enter the time where you
want the water to stop
being heated. Touch
or to change it.
5. When you have finished adjusting the schedule, touch
to insert the new period.
1040*TO∂1500
MO-FR
0630 0830
1040*TO∂1500
MO-FR
0630 0830