CHECKING THE CURRENT
TEMPERATURE SETTING
PRESENT
0
Press and release. The display
SETnNG
will show the current tempera-
ture settina for several seconds,
press a single key to compare
current room temperature to the
setting at any time.
then rever? to the room
temperature.
During recovery from energy
savings, the setting displayed will
not match the programmed set-
ting. This is because the ther-
mostat gradually changes the
temperature setting during re-
covery to provide most efficient
use of the heating or cooling
equipment.
24
To Next Page
Loading...
Need help?
General
