20 69-1332—3
Auto changeover is not an available feature.
5. Press Heat/Cool Settings key to change between heat and cool settings.
6. Press increase ▲ or decrease ▼ to adjust the temperature setting, if desired (for example, if cool is set at
84°, cooling equipment operates when the room temperature is above 84°F).
To cancel the Vacation Hold before the designated time, press Run Program key at each thermostat.
Pressed the wrong key?
Want to start over?
Don’t worry!
You can always press
to return display to normal.
Heat/Cool
Settings
Run
Program
ZONING
ZONING
To Next Page
Loading...
