26 69-1332—3
SETTING THE CLOCK
Setting Current Day and Time
Seting the time and day at one thermostat automatically sets the time and day on all thermostats.
IMPORTANT
Always press the keys with your fingertip or similar blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.
On initial power up or after an extended power loss, “1:00 PM”
flashes on the display until a key is pressed.
1. Press Set Current Day/Time key.
Press Set Current Day/Time key to
show information displayed.
Set Current
Day/Time
M14580
Set Day/Time
Mon
PM
ZONING
To Next Page
Loading...
Need help?
General
