36 69-1332—3
7. Press increase ▲ or decrease ▼ key until the desired
temperature setpoint displays.
M14592
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
Press increase ▲ or decrease ▼ to select the
cooling Wake temperature. Example display
shows the cooling Wake period set for 76°.
8. Press Leave, Return or Sleep and repeat steps 3 through 6 to program the entire day. The day (first day of
a 7-day schedule) is now programmed.
IMPORTANT
Repeat steps 1 through 7 for each day of the week that has a different schedule from the first day. Or
refer to Copying a Day section to copy any programmed day to another day.
9. Press Run Program key to return to normal operation.
Run
Program
Leave Return
Sleep
To Next Page
Loading...
Need help?
General
