11 63-2626
NOTE: The ability to change settings remains for approximately seven seconds.
Once neither the temperature nor the time continue to flash, you must
restart at step 1 to make changes.
4. Use the Up and Down keys
to set the desired time for
the thermostat to resume
the programmed schedule.
NOTE: The installer setup
can limit the length
of time for an over-
ride to 1, 2, 3, or 4
hours beyond the
current time.
5. Press CANCEL to cancel
“Hold Temperature Until” and
resume the schedule.
System & Fan
Override
More
Tue
System
Heat
M23043
Occupied
PM
Fan Auto
Hold Until
To Next Page
Loading...
