9
Toolkits for supports
Your kit should contain one of the following three support toolkits:
• Wall support toolkit
• Turnstile support toolkit
• Swivel support toolkit
The wall support toolkit contains the following items:
The turnstile support toolkit contains the following items:
1 Balance resistors kit and diodes
1 RS-485 connector with cable
1 Jumper
Quantity Description
Quantity Description
1 Tamper switch with cable
1 Drilling template
4 Screws for Fisher plug S5V
4 Plastic plug Fisher S5C
2 Torx screws for reader closing
Quantity Description
1 Tamper switch with cable
1 Drilling template
4 Screws for turnstile
2 Torx screws for reader closing
To Next Page
Loading...
