42 https://extranet.honeywell.com
Voyager door module
You can use the Voyager door module when you must manage the door in
a secure way, using a Voyager device. In this type of architecture as shown
in
Figure 30, the Voyager device is installed on the unsecure side of the
door and the Voyager door module is installed on the secure one.
The input/output for the management of the door (Strike, Request to exit,
and Door sense) are connected to the door module . The communication
between the Voyager device and the door module occurs through the
RS485 serial line with encrypted protocol.
The typical connection of the Voyager door module line appears as shown
in
Figure 29. For more information on the Voyager door module
Figure 29 - Use of Voyager door module
To Next Page
Loading...
