Honeywell TH8321 - Setting the Time;Date; Setting the Fan

VISIONPRO® 8000 SMART THERMOSTAT
33-00096—04 40
Fig. 29. Quick reference to commercial display.
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 45 seconds.
Depending on how your thermostat was installed, the screen light may always be on.
Setting the Time/Date
1. Touch the current time. The screen displays Select
Option.
Fig. 30.
2. Touch Time or Date, then touch Select.
Fig. 31.
3. Touch  or  until the proper time/date is displayed.
4. Touch Done to save or Cancel to ignore changes.
Fig. 32.
5. Touch Home to redisplay the Home screen.
NOTE: The date is not shown on the home screen; how-
ever, it should be set to allow the thermostat to
adjust time automatically for daylight saving time
and for other features such as vacation hold.
Setting the Fan
1. Touch FAN to display fan settings.
Fig. 33.
2. Touch On, Auto, Circ, or Follow Schedule.
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a program
schedule.
Current status. Shows system mode (heat/cool), outdoor
temperature (with optional outdoor sensor, or Wi-Fi
®
connection) and humidity (requires Wi-Fi connection).
Override. Touch to override program schedule.
Current schedule. Touch an arrow to change temperature
setting and set a Temporary Hold.
Current program status.
Indoor conditions. Shows indoor temperature and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or system is set to
EmHeat.
MCR34092
MCR34155
Select Option
Time Date
MCR34094
Please Set Time
6
:30 PM
MCR34096