Honeywell TH8321 - Cleaning the Thermostat Screen; Setting Preferences; Security Settings; Clean Screen

VISIONPRO® 8000 SMART THERMOSTAT
49 33-00096—04
Temporary Boost: Touch  or  to select how long to run
ventilation temporarily. To turn it off, set it to zero.
Fig. 81.
Lockout: Touch  or  to select Yes or No, then touch Next.
Select Yes to prevent ventilation from running during the
Sleep or Unoccupied (commercial) program periods or
when outdoor conditions exceed values set by the installer.
Fig. 82.
Setting Preferences
Preference menu options let you select how the thermostat
displays information or responds to certain situations.
1. Touch MENU and select Preferences.
Fig. 83.
Fig. 84.
2. Select an option and follow prompts:
• Reminders to change filters
• Fahrenheit/Celsius display
• 12/24-hour clock display
• Display Options
–Backlighting (Continuous or On Demand)
–Inactive Backlight (Backlight level while the
screen is not in use. Backlighting must be set to
Continuous.)
–Screen Contrast
• Alert light options
• Scheduling options
• Adaptive recovery
• Default schedule
• Daylight saving time
Fig. 85.
3. Touch Done to save your settings. Touch Cancel to
ignore changes.
Cleaning the Thermostat Screen
When you select the Clean Screen option, the screen is
locked to prevent accidental changes to the thermostat
while you clean the screen.
1. Touch MENU.
Fig. 86.
2. Select Clean Screen. A prompt asks if you want to
clean the screen for 30 seconds.
Fig. 87.
MCR34136
Run Ventilation For
60 minutes
MCR34137
Lockout in Sleep
Period: No
MCR34100
MCR34170
Preferences
Clean Screen
MCR34139
Reminders
Fahrenheit/Celsius
MCR34100
MCR34140
Clean Screen
Security Settings