VISIONPRO® 8000 SMART THERMOSTAT
33-00096—04 42
Fig. 39.
NOTE: To reduce costs, use the “Preset Energy-Saving
Schedules” on page 41.
3. Select the days to schedule, touch Next.
Fig. 40.
4. Touch or to set your Wake time for selected
day(s).
5. Touch or to set Heat and Cool temperatures for
the Wake period.
6. Touch other time periods (Leave, Return, Sleep) to set
time and temperatures for each.
7. Touch Done to save and exit (Touch Cancel to exit
without saving changes).
Fig. 41.
NOTE: Touch Cancel Period to eliminate any unwanted
time period.
Touch Fan Setting to customize fan settings for
any time period.
Overriding Schedules: Residential
Use
1. Touch or to adjust the temperature (right side of
screen) and the Hold Until time (left side). The sched-
ule will resume when the Hold Until time expires.
Fig. 42.
2. Select Permanent Hold to keep the same tempera-
ture until you change it or resume the program
schedule.
Touch Cancel Hold at any time to resume the program
schedule.
Overriding Schedules: Commercial
Use
Touch or to adjust the temperature. It will be
maintained until the hold time you set.
• To change the hold time, touch the Hold Until arrow
buttons. This time can be adjusted up to the maximum
time set by the installer.
Fig. 43.
MCR34102
Use Scheduling
Assistant?
MCR34151
Select the days
to schedule
MCR34152
Set Wake
time & temperature
MCR34103
Temporary Hold
Permanent Hold
To Next Page
Loading...
