Honeywell TH8321 - INSTALLER SETUP ACCESS AND CHANGES; Locating Thermostat Password; Making Installer Setup Changes

VISIONPRO® 8000 SMART THERMOSTAT
33-00096—04 10
Thermostat Password (Date Code)
Fig. 18. Locate password.
The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 1.
Fig. 19.
Make Changes to Installer Setup
1. Touch Menu.
2. Select Installer Options.
Fig. 20.
3. Enter password (date code) and touch Done. See
“Finding Your Password (Date Code) to Access
Installer Options” beginning on page 9 for more
information.
Fig. 21.
4. Select Installer Setup.
Fig. 22.
5. Follow prompts on the screen to select the desired
setup options. See Table 2 for Installer Setup options.
Residential/Résidentiel 18004681502 http://yourhome.honey well.com Commercial/Commerciale 18882451051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M37810A
M35343B
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Reset To Defaults
Device Info
Table 1. Installer Options.
Menu Item Description
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test.
Reset To
Defaults
Select RESET TO DEFAULTS to place all
thermostat settings back to the factory
settings.
Device Info For internal use only.
MCR33976
Installer Options
MCR33977
Enter password
0 0 0 0
MCR34015
Installer Setup
Installer Test