What does E3 mean on my Honeywell TP30?
If E3 appears, check if the ambient temperature is below 89.6°F (32°C). If it's above 89.6°F (32°C), place the unit below 86°F (30°C) for 2 hours before running it again. If E3 reappears after 2 hours, please contact the service center.
General| Model | TP30 |
|---|---|
| Dehumidification Capacity | 30 pints per day |
| Energy Star Rated | Yes |
| Continuous Drain Option | Yes |
| Auto-Restart | Yes |
| Noise Level | 51 dBA |
Guides on choosing the best place for the dehumidifier's operation for optimal efficiency.
Overview of the dehumidifier's control panel and its indicators.
Details on various function buttons and their operations.
Instructions for adjusting the desired humidity level.
How to activate and use the continuous operation mode.
Explains the indicator and sound for a full water tank.
How to set the automatic on/off timer for the unit.
Information on selecting between high and low fan speeds.
Guidance on when and how to clean the air filter.
How to activate sleep mode and its effects on display brightness.
Details on the PTC heater mode for cold environments.
How to use the auto drain pump for continuous drainage.
Explains the unit's ability to resume settings after power loss.
How the unit handles and removes frost buildup.
Procedures for draining collected water from the unit.
Instructions for continuous drainage using a hose.
Setup for continuous drainage with the auto drain pump.
General guidelines for cleaning and maintaining the appliance.
How to clean and maintain the dust filter for optimal performance.
Steps for storing the dehumidifier properly during off-seasons.
Solutions for issues when the dehumidifier fails to power on.
Troubleshooting steps for ineffective dehumidification.
Causes and solutions for the dehumidifier running non-stop.
What to do when the water tank full alert is active.
Explanation of cold air output from the vent.
Information about frost formation on internal coils.
Resolving drainage issues with continuous tubing.
Solutions for water leakage or spillage problems.
Explains normal operating sounds and potential noise issues.
Error code P1 explanation and resolution.
Error code EH explanation and resolution.
Error codes E1/E2 explanation and resolution.
Error code E3 explanation and resolution.
To Next Page