Honeywell VARIODYN D1 Comprio - Line Relay and Error LED Indicators; Line Relay LED Indicators; Line Error LED Indicators

Operation Instruction VARIODYN
®
D1 Comprio
FB 798666.HO.GB0 / 07.13 13
LED indicators of the LINE RELAY
If a loudspeaker circuit is currently in use by e.g. an announcement, this is indicated by the corresponding LED.
A separate relay (LINE RELAY) for each loudspeaker line is used for this with object-specific programming. The
LINE RELAY LEDs indicate which loudspeaker lines are active.
1
23456
CHANNEL 1
Fig. 5: LED of the LINE RELAY
LED LINE RELAY for amplifier channels 1 - 6
OFF 100 V loudspeaker circuit not
in use
ON, green 100 V loudspeaker circuit in use
LED indicators of the LINE ERROR
Depending on the system configuration, every loudspeaker circuit is constantly monitored for short-circuit, earth
fault, impedance deviation and interruption. In event of a fault in the loudspeaker circuit, the associated LED
glows yellow.
In event of a short circuit, the loudspeaker line is no longer connected until the error is corrected.
In event of the other faults, the loudspeaker line continues to remain available for announcements.
1
23456
CHANNEL 1
Fig. 6: LED of the LINE ERROR
LED LINE ERROR for amplifier channels 1 - 6
OFF Normal operation
ON, yellow Fault Î Short-circuit, earth fault, interruption or impedance deviation