Operation Instruction VARIODYN
®
D1 Comprio
FB 798666.HO.GB0 / 07.13 5
1.1 Responsibility of the Operator
In addition to the standard-compliant design, a definition of the minimum requirements and functions between
the operator of the system and the responsible authorities is needed for the setup and operation of a voice
alarm system.
The standard TRVB S 158 applies in Austria (AWS) and the standard DIN VDE 0833 in Germany (VAS) if the
system is controlled automatically by a fire alarm control panel.
Basic stipulations
Definition of the safety level (I, II, III)
Scope of public address system
Alarm areas, detection areas, fire sections
Site of the voice alarm control panel (VACP), configuration levels and accessibility
Need for fire microphones and number of terminals, as well as their usability
Alarm organisation and stipulation of the announcement texts
1.2 Associated Documents
These instructions contain all important information for operation of VARIODYN
®
systems.
Additional information on assembly, installation, start-up and configuration can be found in the following
documents:
Part No. Name
798661.GB0 Planning Principles for Voice Alarm Systems
798667.HO.GB0 Installation Instruction VARIODYN
®
D1 Comprio
798664.HO.GB0 Commissioning Instruction VARIODYN
®
D1 and VARIODYN
®
D1 Comprio
798665.HO Installation Instructions Loop Isolator Module (LIM)
Additional and updated Informations
The described features, specifications and product related informations in this manual correspond
to the date of issue (refer to date on the front page) and may differ due to modifications and/or
amended Standards and Regulations of the System design, Installation and Commissioning.
Updated documentations, informations and declaration of conformity are available for comparison
on the www.esser-systems.de and www.hls-austria.com homepage.
To Next Page
Loading...
Need help?
General
