Honeywell VERSAFLOW MAG 4000 - T-Section; Bends

2 INSTALLATION
12
VERSAFLOW MAG 4000
www.honeywellprocess.com 34-VF-25-51 iss.4 GLO May 18 US
2.8.3 T-section
2.8.4 Bends
Figure 2-8: Distance behind a T-section
1 t 10 DN
Figure 2-9: Installation in bending pipes
Figure 2-10: Installation in bending pipes
CAUTION!
Avoid draining or partial filling of the flow sensor