Need help?Do you have a question about the Honeywell XP 1991i and is the answer not in the manual?
General| Scanner Type | Handheld |
|---|---|
| Interfaces Supported | USB, RS-232, Keyboard Wedge |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Voltage | 5V DC |
Information about the power supply unit included with the scanner, if applicable.
Instructions for connecting the scanner base to a computer using a USB cable.
Details on how to establish a connection using the keyboard wedge interface.
Guidance on connecting the scanner base through an RS232 serial port.
How to use the scanner's aiming beam for effective barcode reading.
Programming the scanner to emulate a standard USB serial COM port.
Configuring the scanner to function as a USB PC keyboard.
Selecting the correct country code for keyboard layout and character mapping.
Managing the linking of a single scanner to the base unit.
Procedure to replace a linked scanner by overriding the locked link.
Explanation of Manual Trigger and Presentation modes for scanning.
Details on the continuous scanning mode with illumination.
Adding or removing carriage return or tab suffixes after scans.
How to enable or disable the transmission of function codes with scanned data.
Accessing the knowledge base and support portal for solutions.
Links to find user guides and other relevant documentation.
Information regarding the product's limited warranty.
Details concerning patents related to the product.
To Next Page