Turning the machine On
The machine is turned on by selecting a programme via the programme
selector. This status will be indicated by the STOP indicator light flashing, this
light will continue to flash until the machine has started or the machine is
returned to the OFF position.
Start/Pause ( )
Start
After selecting the programme and the required options press the button
once to start the machine. The STOP light will stop flashing and START light
will illuminate and there will be a short time delay to the start of the
programme while the machine sets the wash parameters for the selected
programme and options. If the duration of the programme you have selected
17
The Control Panel
The programme selector must be returned to the OFF
position to reset the controls between each wash cycle.
CHRONOVISION
Display
Door Locked Indicator
Start
Pause
Start Delay
Pre Wash
Extra Rinse
Easy Iron
Drying Time
Selector
Temperature
Selector
Programme
Selector
To Next Page
Loading...
