Refer to the Programme Guide or the programme
descriptions on the front of the machine to select
the most suitable programme.
The programme is selected by turning the
programme selector and aligning the programme
name with the indicator.
Check that the STOP indicator is flashing, if not
check that the door is properly closed.
Check that the tap is turned on and that the
discharge hose is positioned correctly.
Select the required wash options
Select the appropriate drying time
based on the table to be found on
page 23.
Starting the cycle
Press the button. The indicator and the
START light illuminate, within a few seconds the
programme will begin.
Do not try to open the door when the
indicator is on.
Do not open the dispenser drawer during the
wash programme.
If you wish to pause the programme press the
button and after 2 minutes the door can be
opened. To cancel the programme the
programme selector should be turned to the OFF
position. A new programme can be selected after
cancelling the programme.
31
Selecting the programme
To Next Page
Loading...
Need help?
General