32
To test the laundry for dryness
When completing the drying phase it is possible
to check the load for dryness.
Press the button, the machine will go into
pause mode indicated by the CHRONOVISION
display time and the option buttons flashing.
After 2 minutes the light will go out
indicating that the door can be opened and the
load checked.
Be very careful as the load and door glass may be
very hot.
To continue close the door and press the
button. The programme will restart and continue
for the remaining time.
When the programme has
finished
Wait for the door lock to be released. The
indicator will go out after approximately 2
minutes and then the door can be opened.
Switch off the machine by turning the
programme selector to the OFF position before
selecting the next programme (this action resets
the memory in the machine).
Open the door.
Remove the laundry.
Disconnect the plug from the mains power supply
and turn off the water supply after every use.
To Next Page
Loading...
