EasyManuals Logo

Hoshizaki KM-1301SWH/3 Service Manual

Hoshizaki KM-1301SWH/3
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
45
Low Ice Production - Possible Cause
9. Compressor a) Inefficient or off.
10. Liquid Line Valve a) Erratic or open.
11. Thermostatic Expansion Valve a) Defective.
Long Freeze Cycle
1. Evaporator a) Scaled up, dirty.
2. Float Switch
See "II.E. Float Switch Check
and Cleaning"
a) Scaled up, dirty.
b) Float sticking.
c) Defective switch.
3. Inlet Water Valve a) Leaking by.
4. Hot Gas Valve a) Erratic or open.
5. Condenser a) Clogged.
6. Control Board
See "II.C. Control Board Check"
a) Float switch connection loose (K5).
b) Defective.
7. Refrigerant Charge a) Low.
8. Thermostatic Expansion Valve a) Bulb loose.
b) Defective.
9. Compressor a) Inefficient or off.
10. Pump Motor a) RPM too slow.
11. Liquid Line Valve a) Erratic or restricted.
12. Headmaster (C.P.R.)
(remote models)
a) Not bypassing.

Table of Contents

Other manuals for Hoshizaki KM-1301SWH/3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hoshizaki KM-1301SWH/3 and is the answer not in the manual?

Hoshizaki KM-1301SWH/3 Specifications

General IconGeneral
BrandHoshizaki
ModelKM-1301SWH/3
CategoryIce Maker
LanguageEnglish

Related product manuals