HOTA D6 Pro - Page 20

Operation Time
Capacity Charged
Battery
Type- string
Number Current
Task Status
Present
Current
Current
Total Battery
Voltage
Device Name Completion
Percentage
Current Channel
Working Parameters Display
Operation and Setup
Input Voltage
Operating
Temperature
Charged Times
Input Power
17
D6 Pro AC/DC Dual Channel Smart Charger
External Discharging
External Discharging status Simple Operation
1. Connect the battery, which is going to discharge ,to the input ends( DC port) of the
charger, and wait for the system to complete its self-checking, then in the standby
interface, connect the high power resistance load to the charger's output ends ;
2. After select the corresponding channel，short press the speed shuttle key to pop up
the“Task Settings”menu, set the task to“Ext. discharge”, adjust the task parameters, and
short press the speed shuttle key to start the task;
3. When the Ext. discharge task is executing，short press the speed shuttle key to pop up the
“Adjust Task”menu，will adjust the Ext. discharge current，long press the CH key can
stop the current task；
4. Enjoy.