HOTA D6 Pro - Task Parameter Settings

Safety Timer
Max. Capacity
Trickle Charge
End Current
Back
< Task parameters
2400Minute
999999mAh
10%
On
Charger Settings > Task Parameters
Operation and Setup
Safety Timer
Back
Trickle Charge
End Current
Max. Capacity
06
D6 Pro AC/DC Dual Channel Smart Charger
In the standby interface，Long press the speed shuttle key to pop up the “Charger Settings”
menu. and then choose “Task parameters” item, the menu items are as follows:
Cut off when less than the ratio between completed current and set up current
Allows maximum running time; running beyond this setting, automatic
protection will stop the task.
Allows maximum charging capacity; running beyond this setting, automatic
protection will stop the task.
Whether to turn on trickle charge : On or Off
Exit the “Task parmeters” menu