Hotone OMP-6 - Edit Detailed Parameters; Preset Edit Menu; Save

2. Edit detailed parameters
In IR select menu, press the FUNC. knob to enter Edit Menu. The screen will come up as shown below:
Turn the FUNC. knob to move the cursor on EDIT PRESET, then press FUNC. knob to enter Preset Edit Menu:
Edit
Preset Edit Menu:
1- Return to previous menu
2- Indicates current cursor position (the PRESET VOL is now selected).
In this menu, turn FUNC. knob to select a parameter (hollow cursor) or edit parameters (solid cursor), press the FUNC. knob to confirm selection/finish editing.
All available parameters are shown below:
(1) PRESET VOL: Controls the current preset volume
(2) EQ: Switches the EQ on/off
(3) LOW FREQ: Controls the EQ low frequency range
(4) LOW GAIN: Controls the EQ low frequency boost/cut amount
(5) MID FREQ: Controls the EQ mid frequency range
(6) MID GAIN: Controls the EQ mid frequency boost/cut amount
(7) HIGH FREQ: Controls the EQ high frequency range
(8) HIGH GAIN: Controls the EQ high frequency boost/cut amount
(9) PRES FREQ: Controls the EQ presence range
(10) PRES GAIN: Controls the EQ presence boost/cut amount
(11) SAVE: Enter Save Menu
1
2
The EQ frequency and boost/cut range are shown below:
BAND
FREQ range
GAIN range
LOW
50Hz-500Hz measured by 10Hz
-12~0~+12(dB)
MID
500Hz-1kHz measured by 10Hz
-12~0~+12(dB)
HIGH
1kHz-5kHz measured by 0.1kHz
-12~0~+12(dB)
PRES
5kHz-16kHz measured by 0.1kHz
-12~0~+12(dB)
Save
To enter Save Menu, select SAVE in Preset Edit Menu or hold FUNC. knob in IR Select menu. The screen will come up as shown below:
Turn FUNC. knob to choose a location. Press the FUNC. knob to confirm saving.
Press the footswitch to cancel saving.
DESI G N INSPI RATION
·5·