Operating Instructions Page 26
HYDROMASSAGE JETS
The Hydromassage jets have two different nozzle options: Directional and Dual Port Rotary. The Directional nozzle allows you to
aim the water in the direction that feels best. The Dual Port Rotary nozzle divides the water flow into two streams, and then spins.
ACCESSORY NOTE: Your Hot Spring
®
Dealer stocks Hydromassage jet kits which can easily be installed in your spa to modify
your jets from Directional to Dual Port Rotary.
SOOTHING SEVEN
®
JET
The Soothing Seven
®
jet is another unique feature of Hot Spring
®
Spas. Its seven outlets are designed to massage the muscles in
the upper back and shoulders, gently and thoroughly. Turn the faceplate clockwise to increase the jet pressure and
counterclockwise to decrease the jet pressure.
PRECISION
®
JETS
Precision
®
jets are located above Moto-Massage
®
jets and in groups of various sizes in the Landmark
®
, Grandee
®
, Sovereign
®
,
Vanguard
™
and Prodigy
®
models. They are designed to perform a soft, soothing massage on your back and shoulders. Adjust
the pressure of the Precision
®
jets using the Comfort Control
®
lever with the dark teal, forest green or blue dot (located closest to
the Precision
®
jets).
Refer to the drawings on the following pages to familiarize yourself with the SmartJet
®
system menus for your spa. Please note
that the SmartJet
®
lever side of the spa is always considered the front when referring to the locations of the different types of jets
and jet systems.
The clock positions are correct when facing the spa, standing at the SmartJet
®
lever.
JETSTREAM
®
JET
The JetStream
®
jet is a large orifice hydromassage jet designed to put maximum massaging action on a specific area of the body.
It is located in the lower part of the spa to afford optimal access for the massaging of feet, legs, hips and lower back. The intensity
of the JetStream
®
jets can be altered (except the ones located in the footwell) using only the Comfort Control
®
lever with the steel
blue or dark grey lever. JetStream
®
jets located in the footwell are not adjustable.
DREAMJET
®
MASSAGE PILLOW JET
Unique to the Landmark Spa, the DreamJet
®
massage pillow provides an adjustable dry neck massage. The strength of the
massage is adjusted by turning the left Comfort Control
®
lever (located closest to the DreamJet
®
massage pillow). Increasing the
air volume will increase the intensity of the massage, while decreasing the air volume will lessen the intensity, providing soothing
relaxation.
OPERATIONAL NOTE: The height of the DreamJet
®
massage pillow is adjustable, this provides the same comfort for different
users. To adjust the height of the pillow, simply push in on the button directly below the pillow to raise or lower the entire
assembly (see illustration below).
DOS AND DON’TS
• DO change the height of the DreamJet
®
massage pillow only when the jets are off.
• DO push the button in for height adjustment, don't pull up or push down on the button.
• DON’T push or pull on the black membrane to raise or lower the DreamJet
®
massage pillow.
• DON’T run the spa if the black membrane is damaged or removed.
• DON’T sit on the DreamJet
®
massage pillow.
To adjust height, push in
and hold the button
While button is depressed, raise or lower
entire assembly at the locations shown
DO NOT adjust the assembly by
grabbing the black membrane
To Next Page
Loading...
