HOUNO B Series - SETUP MENU; Oven Configuration Settings

SETUP MENU
22 SERVICE MANUAL
REVISION 04/19, SW: 3.51
SETUP MENU
Value Function Description
U1 Oven type Setting up the CPU to the right type of oven.
Confirm the chosen type by pressing the bell.
U2 Oven size Setting up the CPU to the right size of oven.
U3 CombiWash Is the oven fitted with or without combiwash.
0 = without CombiWash.
1 = with CombiWash
U4 Temperature
C/F
0 = Celcius
1 = Fahrenheit
U5 Gas Setting up the power.
0 = Electric
1 = Gas LPG (G30/G31)
2 = Gas G20
3 = Gas G25
U7 Preheat 300°C Setup the oven to preheat at 300°C
U8 Water level set
point
Setup the water level set point for the steam
generator.
Default value = 75.
U9 Restart after
power cut
Setup the amount of time the oven can be without
power and continue when the power returns.
(always follow local regulations)
U11 Core probe 0 = Core probe inactive.
1 = Core probe active.
To enter the user menu, press HOT AIR and STEAM for 5 seconds while you are in the
manual mode.
The display briefly shows ”SETUP MENU”. The core temperature display shows ”b” and
the number of the value to be set (see below). You leave the user menu by turning the
turn knob beyond ”0”.