What to do if HOUNO B Series stop due to gas during operation?
If your HOUNO Kitchen Appliances experience a gas stop during operation, first check, clean, or change the electrode or burner. If the issue persists, initiate the startup sequence through the test function.
General| Brand | HOUNO |
|---|---|
| Model | B Series |
| Category | Kitchen Appliances |
| Language | English |
Safety precautions for oven operation and gas units.
Procedures for gas leaks and safety during maintenance.
Explains main controls, settings, and modes on the operation panel.
How to set temperature, time, and optional core temperature.
Managing programmes and entering text.
How to input and modify data for individual programme steps.
Details on using Hot Air and Preheating modes.
Explains CombiSmart, Cook & Regen, and Proving functions.
Manual humidity, steaming in C/K models, and general steaming advice.
Controls for damper, fan speed, and timer/clock.
How to use the optional CombiWash automatic cleaning system.
Steps for semi-automatic cleaning on ovens without CombiWash.
Overviews of the different menu systems.
Settings for oven type, size, CombiWash, gas, and preheat.
Settings for drain cooling, timer, demo mode, initialization, and gas RPM.
Saving defaults, timer configuration, and adjusting sound levels.
Settings for current temp, extraction, time display, and data management.
Configuring screen saver, language, and performing software updates.
Testing main contactor, heating, and generator functions.
Testing fan direction, valves, pumps, and damper motor.
Testing exhaust, fan, sound, light, and oven temperature.
Testing and adjusting core probe and steam generator temperatures.
Testing drain temperature and door sensor calibration.
Testing water level, pressure, CombiWash pumps, and motor RPMs.
Accessing error logs, statistics, and monitoring board temperatures.
Detailed steps for testing gas burners 1 and 2.
Instructions for cleaning the oven chamber using various methods.
How to clean oven exterior and behind the filter housing.
Procedures for cleaning jet heads and the oven filter.
Detailed description of components shown in the water layout diagram.
Explanation of the different LEDs on the I/O board and their meanings.
How to adjust potentiometers and dip switches on the frequency inverter.
A comprehensive list of error codes and their corresponding descriptions.
Further error codes and their descriptions for system diagnostics.
Step-by-step troubleshooting for Error Code 3.
Step-by-step troubleshooting for Error Codes 4 and 5.
Step-by-step troubleshooting for Error Codes 6 and 7.
Step-by-step troubleshooting for Error Codes 8 and 9.
Step-by-step troubleshooting for Error Codes 10 and 11.
Step-by-step troubleshooting for Error Codes 12 and 13.
Step-by-step troubleshooting for Error Codes 14A and 14B.
Step-by-step troubleshooting for Error Codes 16 and 18.
Step-by-step troubleshooting for Error Codes 19 and 20.
Step-by-step troubleshooting for Error Codes 22 and 23.
Step-by-step troubleshooting for Error Codes 24 and 25.
Step-by-step troubleshooting for Error Codes 28 and 29.
Step-by-step troubleshooting for Error Codes 34 and 40.
Step-by-step troubleshooting for Error Codes 43 and 44.
Step-by-step troubleshooting for Error Code 45.
Troubleshooting steps for gas-related error codes.
Troubleshooting for gas valve and fan RPM errors.
Troubleshooting for fan error and ignition failure.
Troubleshooting for gas failure and gas stop errors.
Overview of error codes related to the Dungs control box.
Safety precautions for service/repair and warranty details.
To Next Page
