Hover-1 i-100 - HOVERBOARD OPERATION AND SPECS; Core Operating Principles; Enhancing Riding Stability; Technical Specifications

The i-100 hoverboard is a personal transporter. Our production processes
are developed with strict testing for each hoverboard. Operating the
hoverboard without following the contents of this manual may lead to
damage to your hoverboard or bodily injury.
PACKAGE CONTENTS
• Hover-1 i-100 Hoverboard
• Charger & Charging Cable
• Operation Manual
FEATURES/PARTS
1. Fender 6. Tire
2. Right Foot Mat 7. LED Light
3. Battery Indicator 8. Charge Port (located in rear)
4. Running Indicator 9. Power Button (located in rear)
5. Left Foot Mat 10. Wireless Speaker
OPERATING PRINCIPALS
The i-100 uses digital electronic gyroscopes and acceleration sensors to
control balance and motion, depending on the user's center of gravity.
The i-100 also uses a control system to operate the motors that are
located within the wheels. The i-100 has a built-in inertia dynamic
stabilization system that can assist with balance when moving forward
and backward, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when entering a
turn at higher speeds.
Model: H1100
Net Weight: 16.3 lbs (7.4 kg)
Max Supported Weight: 220 lbs (100 kg)
Min Supported Weight: 44 lbs (20 kg)
Max Speed: Up to 7 mph (11.26 km/h)
Max Range: Up to 10 miles (16.09 km)
Max Incline Angle: 10°
Minimum Turning Radius: 0°
Charge Time: 5 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2V
Battery Capacity: 4Ah
Power Requirement: AC 100V240V, 50Hz/60 Hz
Tire Size: 6.5 Inches (16.51 cm)
Tire Type: Non-Pneumatic Solid Tires
UL Certiication: UL2272 approved
FCC ID: 2AANZRCKR
BT ID: D042258
SPECIFICATIONS
WARNING
5