Hover-1 RAPTOR - Attaching the Raptor to Your Hoverboard

9
Carefully follow the instructions shown on the following pages to attach the Raptor to your hoverboard. Read
this entire manual before riding your Raptor.
Your Raptor must be completely assembled before attaching it to your hoverboard. Please refer to the
“ASSEMBLING YOUR RAPTOR” section of the manual for assembly instructions.
1. Place the handlebar mounts onto the foot pads of your hoverboard. Ensure the mounts are centered on
the foot pads of your hoverboard as much as possible.
ATTACHING THE RAPTOR TO YOUR HOVERBOARD
SPACE EVENLY