What to do if Hoymiles DTU-W100 3rd Gen DTU disconnects from server?
If your Hoymiles Measuring Instruments DTU disconnects from the server, you can try redoing the configuration. Also, double-check the Port and server address inside the DTU. Contact Hoymiles Tech. Support team for the correct address.
General| Brand | Hoymiles |
|---|---|
| Model | DTU-W100 3rd Gen |
| Category | Measuring Instruments |
| Language | English |
Manual includes important instructions for installing and maintaining the Hoymiles Data Transfer Unit (DTU).
Explains safety symbols (DANGER, WARNING, CAUTION) and provides crucial safety notes for DTU installation and use.
Specifies that this manual is intended for professional installation and maintenance personnel only.
Provides contact details and website for technical queries and further support from Hoymiles.
Details the function of Hoymiles microinverters in converting DC to AC power and sending data to the DTU for monitoring.
Explains the DTU's role as a communication gateway between microinverters and the Hoymiles Monitoring Server.
Describes the monitoring server's function in collecting and providing panel-level monitoring data for users and staff.
States the DTU's capability to monitor up to 99 single units, 49 two-in-one, or 24 four-in-one units.
Lists essential site requirements for DTU installation, including router proximity, internet stability, and environmental conditions.
Provides the physical dimensions of the DTU unit with a diagram.
Details the interface components of the DTU, including USB connector, status indicator, and reset button.
Introduces the Local Install Assistant function for WiFi configuration, status checks, and connection strength display.
Outlines the step-by-step process for installing the Hoymiles microinverter system, from microinverter setup to completion.
Covers the physical installation steps for the DTU, including locating it and connecting it to power.
To Next Page
