EasyManuals Logo

Hoymiles HMS-1600B-4T User Manual

Hoymiles HMS-1600B-4T
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
© 2022 Hoymiles Power Electronics Inc. All rights reserved.
4
Single-phase Microinverter HMS-1600/1800/2000-4T-NA
1. Important Notes
1.1 Product Range
This manual describes the assembly, installation, commissioning, maintenance and troubleshooting of the
following models of Hoymiles Microinverter:
· HMS-1600-4T-NA
· HMS-1800-4T-NA
· HMS-2000-4T-NA
*Note: “1600” means peak power 1600 W, “1800” means peak power 1800 W, “2000” means peak power 2000 W.
NA” means this model is for North America.
*Note: HMS-1600/1800/2000-4T-NA is only compatible with Hoymiles gateway DTU-Pro-S and DTU-Lite-S.
1.2 Target Group
This manual is only for qualied technicians. For safety purposes, only those who have been trained
or demonstrate relevant skills can install and maintain this microinverter under the guidance of this
document.
1.3 Symbols Used
The safety symbols in this user manual are shown as below.
Symbol Description
This indicates a hazardous situation that can result in deadly electric shocks,
other serious physical injuries, or re incidents.
This indicates that directions must be strictly followed to avoid safety hazards
including equipment damage and personal injury.
This indicates that the act is forbidden. You should stop, use caution and fully
understand the operations explained before proceeding.
1.4 Radio Interference Statement
This microinverter has been tested and complies with the requirements of FCC, meaning that it will not be
aected by electromagnetic interference. Please note that incorrect installation may cause electromagnetic
disturbances.
You can turn the equipment o and on to see if radio or television reception is interfered by this equipment.
If this equipment does cause harmful interference to radio or television, please try the following measures
to x the interference:
1) Relocate other apparatus’ antenna.
2) Move the microinverter farther away from the antenna.
3) Separate the microinverter and the antenna with metal/concrete materials or roof.
4) Contact your dealer or an experienced radio/TV technician for help.
Important Notes

Other manuals for Hoymiles HMS-1600B-4T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hoymiles HMS-1600B-4T and is the answer not in the manual?

Hoymiles HMS-1600B-4T Specifications

General IconGeneral
BrandHoymiles
ModelHMS-1600B-4T
CategoryInverter
LanguageEnglish

Related product manuals