Buttons, switches, and fingerprint reader
Item Component Function
(1) Power button
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is on, press the button to shut
down the computer.
●
When the computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP), press the button
briefly to exit the Sleep state or Standby.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
To learn more about power settings, follow these steps:
●
In Windows Vista, select Start > Control Panel >
System and Maintenance > Power Options.
●
In Windows XP, select Start > Control Panel >
System and Maintenance > Power Options.
(2) Internal display switch Turns off the display if the display is closed while the power
is on.
(3) Info button Launches Info Center, which enables you to open various
software solutions.
(4) Wireless button Turns the wireless feature on or off, but does not establish
a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
(5) Presentation button Starts the presentation feature.
(6) Volume mute button (select models only) Mutes and restores speaker sound.
8 Chapter 2 External component identification
To Next Page
Loading...
Need help?
General
