To Next PageTo Next Page
Need help?Do you have a question about the HP Compaq nc6000 - Notebook PC and is the answer not in the manual?
General| Processor | Intel Pentium M |
|---|---|
| Chipset | Intel 855PM |
| Storage | 30 GB to 60 GB HDD |
| Hard Drive Interface | ATA-100 |
| Battery | 6-cell Lithium-Ion |
| Operating System | Windows XP Professional |
| RAM | 256 MB, upgradable to 2 GB |
| Graphics | ATI Mobility Radeon 9600 |
| Display | 14.1-inch |
| Display Resolution | 1024 x 768 or 1400 x 1050 |
| Optical Drive | DVD-ROM, CD-RW/DVD Combo, or DVD±RW |
| Networking | 10/100/1000 Ethernet |
| Ports | 2 x USB 2.0, VGA, parallel, serial, headphone, microphone |
Details the naming conventions and configurations for HP Compaq nc6000 models.
Lists the key hardware and software features of the notebook.
Provides steps to clear the notebook's BIOS password.
Explains the power management features integrated into the notebook.
Identifies and describes the external ports and controls on the notebook.
Presents an overview of the notebook's design and key components.
Explains system setup and diagnostic tools for troubleshooting.
Guides on using Windows diagnostics for system testing and information.
Provides a list of flowcharts for diagnosing specific notebook issues.
Shows where to find the notebook's serial number for service.
Shows an exploded view and list of major notebook internal components.
Lists spare part numbers for hard drives and MultiBay devices.
Lists spare parts by sequential part number for easy reference.
Lists the necessary tools for performing disassembly and reassembly.
Provides general advice and precautions for disassembly and assembly.
Offers precautions for safely handling and removing notebook drives.
Explains the risks of ESD and methods to prevent it during service.
Details safety measures and grounding procedures for service workstations.
Instructs on reporting the serial number for service requests.
Provides a chart mapping components to removal sections and screw counts.
Outlines essential steps before starting any removal or installation.
Provides detailed steps for removing and replacing the notebook keyboard.
Guides on how to remove and replace the heat sink assembly.
Details the procedure for removing and installing the CPU.
Explains how to remove and replace the notebook's display.
Provides steps for removing and replacing the notebook's top cover.
Explains the process of removing and replacing the main system board.
Lists the general physical and performance specifications of the notebook.
Provides detailed specifications for the notebook's TFT display.
Lists technical specifications for different capacity hard drives.
Details the pin assignments for the RJ-45 network port.
Shows the pin configuration for USB ports.
Details the pin assignments for the parallel port connector.
Outlines general power cord specifications applicable to all countries.
Lists accredited agencies and notes for power cord compliance by country.
Details the specifications and usage of the Torx T5M3.0x4.0 screw.
Details the specifications and usage of the Phillips PM3.0x4.0 screw.
Details the specifications and usage of the Torx T8M2.5x9.0 screw.
