Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
Spare Part Number Information
Battery packs
Primary battery pack, Li-Ion, 6-cell, 3.6-Ah, 48-Wh
Battery pack, 6-cell
338669-001
346886-001
To Next Page
Loading...
