HP 2140 User Manual

LCDerrormessages
(continued)
Display
Memory Full
Press OK to continue
Status/Solution
Memory has become full while scanning a document. Press OK
to send or copy the scanned pages only. To cancel the job press
Cancel and try again when memory becomes available, or split
the new document into smaller parts. See Clearing memory on
page 36.
Memory Received The machine has data stored in memory. Replace the print
Ink Low. Install new cartridge with new one in order to print the faxes.
ink cartridge
Memory Received Load paper and press OK. There might be a jam. Clear the jam
Load paper and as described in Paper jams during printing on page 41.
press OK
Memory Received There is no print cartridge in the machine. Install a print cartridge.
Install ink
cartridge
No answer from The other machine has not answered after all redial attempts to
remote fax send a fax.
No CID Number The machine could not detect the CID (Caller ID) number.
No Dial Number There is no number in the redial memory.
Not _v_iZ_ble while The machine could not receive a new fax while printing the
reprinting fax stored faxes.
Not Found The number you are searching for does not exist in memory.
Number already The number you are trying to enter already exists in the phone
registered book or junk fax list.
Number Not Assigned There is no number assigned to this One-Touch or two-digit
Speed number.
Poll Code Error The remote user entered the wrong poll code.
Poll job exists You have already programmed a polling send. Cancel scheduled
already job and try again.
Polling Error The machine you want to poll is not ready to answer your poll.
Check remote site Check with the other person.
Receiving Error. There is an error while receiving a fax.
Ask sender to
try again.
Remove jammed
document
The document you are sending has jammed in the document
feeder. To clear the document jam, see Document jams during
transmission on page 41.
You tried to copy or fax a document which is longer than 390 mm
(15.4 in.).
Care and maintenance 47

HP 2140 Specifications

General

HDD speed	5400 RPM
HDD capacity	160 GB
HDD interface	SATA
Storage media	HDD
Optical drive type	No
Card reader integrated	Yes
Compatible memory cards	SD
Battery life (max)	4 h
Number of battery cells	3
Bus type	FSB
Stepping	C0
Tjunction	90 °C
Processor cache	0.512 MB
Processor cores	1
Processor model	N270
Processor family	Intel Pentium Mobile
Processor series	Intel Atom N200 Series
Processor socket	Socket F (1207)
Processor threads	2
Processor codename	Diamondville
Processing Die size	26 mm²
Processor frequency	1.6 GHz
Processor cache type	L2
Processor lithography	45 nm
Processor manufacturer	Intel
Processor front side bus	533 MHz
Processor operating modes	32-bit
Thermal Design Power (TDP)	2.5 W
CPU multiplier (bus/core ratio)	12
Number of Processing Die Transistors	47 M
HD type	Not supported
Display diagonal	10.1 \
Display resolution	1024 x 576 pixels
Native aspect ratio	16:9
Operating system installed	Windows XP Home Edition
Memory slots	1x SO-DIMM
Internal memory	1 GB
Internal memory type	DDR3-SDRAM
Maximum internal memory	2 GB
Memory layout (slots x size)	1 x 1 GB
Graphics card	GMA 950
Dimensions (WxDxH)	261.4 x 166.2 x 26.7 mm
Wireless technology	IEEE 802.11 a/b/g/n
Motherboard chipset	Intel 945GSE
Keyboard layout	-
Pointing device	Touchpad
Cabling technology	10/100/1000Base-T(X)
Networking features	Gigabit Ethernet
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Audio system	HD
Cable lock slot type	Kensington
Charging port type	DC-in jack
HDMI ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC adapter power	65 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	EPEAT Silver, ENERGY STAR
Product type	Netbook
Country of origin	China
Processor code	SLB73
Processor ARK ID	36331
Processor package size	22 x 22 mm
Supported instruction sets	SSE2, SSE3

Weight and Dimensions

Depth	166.2 mm
Width	261.4 mm
Height	26.7 mm
Weight	1190 g