UseHewlett-Packardsupportservices
Noticetousers of the Canadian telephone network/Note & rattention des utilisateurs du
r6seau t616phonique Canadien
This product meets the applicable Industry Canada technical specifications/Le present materiel
est conforme aux specifications techniques applicables d'lndustrie Canada.
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five/L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre
maximal de terminaux qui peuvent 6tre raccordes a une interface tel6phonique. La terminaison
d'une interface peut consister en une combinaison quelconque de dispositifs, a la seule condition
que la somme d'indices d'equivalence de la sonnerie de tousles dispositifs n'exc_de pas 5.
For non-European customers
This product is approved for use only in the country in which it was purchased. Local country laws
may prohibit the use of this product outside the country of purchase. It is strictly forbidden by law
in virtually every country to connect nonapproved telecommunications equipment (fax machines)
to public telephone networks.
Use Hewlett-Packard support services
www.hp.com/support
If you are unable to find the answer you need in the printed documentation supplied with your
product or on the web, you can contact your HP dealer or call the support phone number for your
country/region for help.
For the most current list of telephone support numbers and call costs information, go to
www.hp.com/support.
Before calling customer support
1 Make sure that
• Your unit is plugged in and turned on.
• The correct print cartridge is installed properly.
• The recommended paper is loaded in the input tray.
2 Reset yourunit by unplugging it and plugging it in again.
3 Ifyou need to speak to an HP Customer Support Representative:
• Have your serial number ready.
• Print a Self-Test Report.
• Be preparedto discuss your problem in detail.
4 Be near your unitwhen you call.
Prepareyour unit for shipment
Ifyou are requested to send in your unit for service, do the following:
• Removethe print cartridge andplace it in an airtight bag so it will not dry out. Do not send the print cartridge
with the unit unless asked todo so.
• Ifyou do not have the original packing material, you can request a replacement package set from HP
Customer Support. Shipping damage caused by improper packaging is not covered under the warranty.
• Include these items in the box:
• A brief description of the symptoms (sample prints are helpful).
• A copyof your sales slip or proof of purchase (to establish the warranty period).
• Your name, address, and telephone number where you can be reached during the day.
Specifications and regulatory information 59
To Next Page
Loading...
Need help?
General
Weight and Dimensions
