18
HDMI connector P200 (P201)
Repair the HDMI connector:
1) Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the J2 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component
Function test
After repair, be sure to confirm that all functions are working.
Table 4-1: Function test
Te
Operating description Tool used
HDMI test
Confirm whether image displays and sound plays
DP test Confirm whether image displays and sound plays
correctly on the monitor.
Computer or DVD player
Audio test Change volume and balance to confirm whether
volume is smooth and loud enough.
Speaker
Test item Operating description Tool used
VGA test Confirm whether image displays and sound plays
correctly on the monitor.
Computer or DVD player
correctly on the monitor.
Computer or DVD player
To Next Page
Loading...
