5
increases adjustment levels.
4
Viewing Modes
/
Exit
Function button 1—assignable
Viewing Modes
: If the OSD menu is closed, opens the
Viewing Modes menu to
choose different screen viewing settings.
Exit: If the OSD menu is open, saves changes and
exits the OSD menu.
5
Power
Turns the monitor on or off.
NOTE:
You can reconfigure the Function buttons in the OSD menu to quickly select the most commonly used operations.
Press the Menu button to open the OSD, and then select Menu Control. Select Assign buttons, and then select
one of the available options for the button you want to assign.
Rear components
To identify the components on the rear of the monitor, use this illustration and table.
<
Table 2-2>
Table 2-3: Rear components and their descriptions
Component Function
1 HDMI connector Connects an HDMI cable to the source device.
2 VGA connector Connects a VGA cable to the source device.
3 Audio-in jack Connects the audio cable (not included) from the
source device to the monitor.
4 Audio-out jack Connects optional headphones, earbuds, a
headset, or a television audio cable.
5 Security cable slot Connects a security cable to the monitor.
6 Power connector Connects a power cord.
To Next Page
Loading...
