screw on the chassis cover intact, and if you want to open the
chassis, contact your local HP agent for permission. Otherwise, HP shall not be liable for any consequence
caused thereby.
Figure 16 Hardware installation flow
Start
Install the switch to a
19-in rack or
workbench
Ground the switch
Connect the power cord
Verify the installation
Power on the switch
Operating properly?
End
Power off the switch
Troubleshoot the
switch
Yes
No
Installing the switch in a 19-inch rack
The 3600 v2 switch is available with one pair of mounting brackets, as shown in Figure 17.
11
To Next Page
Loading...
