HP 3600 v2 Series - 100 Base-X SFP Port

Item Specification
Connector type RJ-45
Interface attributes
• 1000Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission
distance
100 m (328.1 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3u
100Base-X SFP port
The 3600-24-SFP v2 EI Switch provides 24 100Base-X SFP ports, and you can install the 100 Mbps SFP
transceiver modules in Table 11 in the ports.
Table 11 100 Mbps SFP transceiver modules available for the 3600 v2 Switch Series
Product
code
Module description
Central
wavelength
(in nm)
Fiber diameter
(in μm)
Max transmission
distance
JD102B
HP X110 100M SFP LC FX
transceiver
1310 62.5/125 2 km (1.24 miles)
JD120B
HP X110 100M SFP LC LX
transceiver
1310 9/125 15 km (9.32 miles)
JD090A
HP X110 100M SFP LC
LH40 transceiver
1310 9/125 40 km (24.86 miles)
JD091A
HP X110 100M SFP LC
LH80 transceiver
1550 9/125 80 km (49.71 miles)
JD100A
HP X115 100M SFP LC BX
10-U transceiver
TX: 1310
RX: 1550
9/125 15 km (9.32 miles)
JD101A
HP X115 100M SFP LC BX
10-D transceiver
TX: 1550
RX: 1310
9/125 15 km (9.32 miles)
IMPORTANT:
You must use the HP X115 100M SFP LC BX 10-U transceiver (JD100A) and the HP X115 100M SFP LC BX 10-D
transceiver (JD101A) in pairs.
1000Base-X SFP port
Every 3600 v2 switch has four 1000Base-X SFP ports, including two combo ports paired with two
1000Base-T Ethernet ports, on the front panel. Table 12 lists the 1000Base-X SFP transceiver modules
available for the 3600 v2 Switch Series.
46